【Structure and composition】
This product is filtering half mask with valve to protect against particles, limited to one shift use only. The product is composed of mask body, nose clip and ear straps and adjusters. The mask body has a four-layer structure. Both the inner and outer layers are made of needle punched cotton. The intermediate filter layer is 2 layers melt-blown PP. The nose clip is made of silver aluminum alloy. The ear strap is made of polyester. The adjuster is made of PP. The valve is made of PP and silica. The inner layer of the mask also has a circle of poron made of artificial leather
【Indications For Use】The protective mask is intended used for protection against solid and oily particulates, liquid and microorganisms such as coal dust, cement dust, acid fog, paint fog, oil smoke, oil mist, asphalt smoke, coke oven smoke etc. Single-use
【Limitations】Not suitable for working places where open flames exist (such as welding,casting,etc,); It is not suitable for professional protective use such as oxygen deficient, toxic gas environment. No medical use.
【Checks prior to use】Before use, check whether the package of the mask is damaged and the components are intact. In case of any stain or damage, discontinue use immediately.
【Transporting】When transporting this product use original packaging provided.
【USE CAUTIONS】
a)Please check fit of mask prior to use;
b)It is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal;
c)Please do not use the mask under low air quality condition, such as serious contaminants in air, oxygen deficiency
d)Do not use the mask in explosive atmosphere;
e)After use, please discard the mask following local regulation;
f)The mask is only for single use, do not use repeatedly.
g) “Warning - this product is not flame resistant and must not be used in areas with open flames”
h) Discard the respirator and replace with a new one if excessive clogging of the particle filtering half mask cause breathing difficulty or the particle filtering half mask becomes damaged.
i) DO not use the same respirator for more than 8 hours continuous or intermittent, in dirty workplaces that could result in high filter loading.
See information supplied by the manufacturer.
Fitting
STEP 1. Hold the respirator in hand with the nosepiece at your fingertips,allowing the headbands to hang freely below your hand.
STEP 2. Press the respirator firmly against your face with the nosepiece on the bridge of your nose.
STEP 3. Stretch and position the top band high on the back of the head.Stretch the bottom band over the head and position below your ears.
STEP 4. Using both hands,mold nosepiece to the shape of your nose. Adjust the adjuster so to fix he mask, and make the people more comfortable.
STEP 5.TO test fit:
a)Cuo both hands over the respirator being careful not to distrub position,and
b) inhale vigorously.if air leaks around the edges, reposition the straps or adjust strap tension for better fit.
Please carefully follow these fitting instructions during each use to achieve proper fit.
Storage Condition: The product should be stored in a well ventilated, dark and dry environment. Keep away from fire, pollutants and possible pollution sources. Also, the transport storage ‘s temperature: -5℃~50℃, relative humidity: < 75%RH.
CompleteShelf-Life: The Protective Mask is valid for 3 years with the above storage condition.
Production Batch Number: Printed on the bottom
Production Date: Printer on the bottom
Expiration Date: Printer on the bottom
Manufacturer: Guangdong Fengluyuan Biopharmaceutical Technology CO., LTD
Complete Address: Building 2nd, Guantai Biotechnology Cooperation And Breeding Center 1# Taoyuan Road, Taiwan Hi-tech Park, Songshan Lake, Dongguan Guangdong China.
Phone: 0769—22426953
Company Website:opienka.cn
Notified Body for EU type-examination and production control:
Notified Body Name : LGAI TECHNOLOGICAL CENTER, S.A. (APPLUS)
Notified Body Address : Campus de la UAB - Ronda de la Font del Carme s/n08193Bellaterra (Barcelona)
Notified Body No. : 0370
Cert & report
EU CUP FFP3 WITH VALVE PROTECTIVE MASK CE CERTIFICATE
TEST REPORT OF CUP FFP3 WITH VALVE PROTECTIVE MASK